From: Eckhart Köppen (eck1001_at_gmx.net)
Date: Sun May 16 2004 - 23:27:40 PDT
On Sun, 16 May 2004 11:45:24 +0200, noiseiskinky wrote:
> Installing Nitro/blunt package I've received an error message sayng
> "this package cannot work with this system",
It probably got corrupted during download. Try do download again. After
activation/installation, no error should occur. After twenty seconds
however, it patches NIE to make the IrDA and Bluetooth options
available.
> I've then filed it from
> memory card to internal memory and resetted Newton, and after all
> packages are loaded an error message appear sayng "Sorry, a problem has
> occurred (214442784)"
This packages should be kept on the card (it doesn't have to but it
might eliminate one source for errors).
> Using Nitro test I've succesfully sent AT commands to cellphone, I've
> tryed to dial some number and cellphone correctly respond. AT1 return
> ERROR, AT return OK...
>
> Anyway PPP stops at "loading ppp dirvers..." stage
This is a symptom that NIE is not talking via IrDA to the phone but
instead just the serial port. You have to remove my patched NIE Serial
& Modem module, replace it with the original, get NIE Nitro & Blunt
properly installed and then create an Internet Setup with IrDA as the
connection choice. If IrDA is not avaiable, make sure that NIE Nitro &
Blunt is indeed correctly installed and you gave it the twenty seconds
it takes to patch NIE.
Eckhart
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Mon May 17 2004 - 01:00:03 PDT