From: Woody Smith (woodysmith_at_comcast.net)
Date: Sun Nov 21 2004 - 20:25:07 PST
Hi Matt
I got it to work today.
on the newton side I set the server to my computer's IP address ( if
you are unsure open system preferences and look at Network) Queue is "
lp on 'your ip address' "
Server.........192.168.1.100
Queue.........lp on 192.168.1.100
spool job before sending it is checked
While I have had success with Escale I prefer NCU with ethernet in
classic.
Woody
On Nov 21, 2004, at 9:42 PM, matt wrote:
> Okay, printing update. I can't seem to try to do anything with this
> Newt that actually works. Rather frustrating. I've installed the last
> update to NIE (4 from Paul's site, if memory serves). I've installed
> the Gimp print drivers and added that to my available printers. I've
> double and triple checked that my firewall is allowing the printers to
> be shared, which I've checked off in sharing.
>
> . I've changed the name of the
> print que on the Newt to match the name of the print que on the mac.
> Everything seems okay on the Newton side, but it gets to the "grabbing
> link", and never gets past connecting. Through all of this, the
> printer doesn't even begin to warm up, so it's never even knowing how
> hard I'm trying to get something to it to print.
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Sun Nov 21 2004 - 21:00:01 PST