From: Martin Joseph (martyNT_at_barknaturalpet.com)
Date: Thu Apr 14 2005 - 10:12:36 PDT
On Apr 14, 2005, at 7:02 AM, Becky K wrote:
>
> I ended up masking off the display and removing the screw head. I'm
> going to
> leave the shaft of the screw in place, as the shaft only serves to
> anchor that
> corner while the other screws keep it in place. I'd hate to make a
> bigger mess
> of it by wrestling to get that out.
Once you take the case off, you should be able to use some finer nosed
vice grips to turn the shaft out, with no damage...
Then you can get a shiny new screw (or not shiny rather).
Marty
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Thu Apr 14 2005 - 10:30:01 PDT