From: Woody Smith (woodysmith_at_comcast.net)
Date: Fri Feb 04 2005 - 17:28:13 PST
See eBay item #5747329611 for the PC to Newton serial connector.
for the Mac you will need a USB Serial adapter then a mac serial
printer cable.
There are pros and cons for connecting to either computer, but if you
have an in-house ethernet network you can connect to the Mac running
classic and NCU once the drivers are installed.
so it would be cheaper to get the PC cable and install ethernet drivers
and get a cheep 3Com or other 10mbs card.
Woody
On Feb 4, 2005, at 3:55 PM, Michael Grauer wrote:
> What are my options for a serial cord for my emate? I have both a ibm
> pc and a modern g4 mac.
>
> Help!
>
> --
> This is the NewtonTalk list - http://www.newtontalk.net/ for all
> inquiries
> Official Newton FAQ: http://www.chuma.org/newton/faq/
> WikiWikiNewt for all kinds of articles:
> http://tools.unna.org/wikiwikinewt/
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Sat Feb 05 2005 - 04:30:02 PST