Re: [NTLK] I got my eMate! Now, how to hook it up ...

You will first need to install the Ethernet driver and the NIE bundle
(unless they are already installed) before using an Ethernet or
802.11 PC card. You also need to have a compatible Ethernet card, not
all card are compatible. Look at the Wiki for more detail.

The only way to install stuff on the eMate is to go with serial
adaptor to USB and a serial cable. If you have an older Mac with
serial port, you can use only a serial cable.

Those cable can be found easily on eBay.

Le 06-12-21 à 15:01, Sascha Segan a écrit :

> I got my eMate! It's beautiful. :) I'll start contributing to the
> Efty Wiki
> soon; I recently met a guy who's a programmer with a 1-year-old and
> also
> wants in on the project.
>
> I'm a little confused about whether I can *initially* hook my eMate
> up to my
> Mac using Ethernet, or whether I need to get a serial-to-usb cable.
> It looks
> like there are drivers for several Ethernet and even 802.11 PC
> Cards (and I
> have a bunch of PC Cards) - but I can't figure out how I'd install
> them
> without the cable. Is that the case - should I go out and get/build
> a cable?
>
> Thanks.
>
> Sascha
>
>
> --
> This is the NewtonTalk list - http://www.newtontalk.net/ for all
> inquiries
> Official Newton FAQ: http://www.chuma.org/newton/faq/
> WikiWikiNewt for all kinds of articles: http://tools.unna.org/
> wikiwikinewt/
>

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/