Re: [NTLK] Newton 2100 first sync: possible via ethernet?

I'm not sure why you were able to connect successfully on the plane,
but if you're using a 10.x.x.x subnet, then the subnet mask should be
255.0.0.0 as this is a Class A scheme.
Give it a try and report back to us.
ken Whitcomb

On Aug 28, 2008, at 7:17 AM, Carlos Pessoa Filho wrote:

> What I did:
> 1) I've manually configured the Newton with IP 10.0.0.7 and Gateway
> 10.0.0.1
> 2) I've manually configured my Macbook Pro with IP 10.0.0.1 and Subnet
> 255.255.255.0 and turned appletalk and sharing on. I also turned off
> the Firewall.
> 3) On the Newton I tap Dock and have selected TCP/IP.
> 4) On the Mac I used the Finder/Go/Connect to Sever and input the
> 10.0.0.7 address. Voilá! Everything was working. NCS could see the
> Newton and I could install packages etc.

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Thu Aug 28 11:14:34 2008