Re: [NTLK] Dead 2100 touch screen ?

From: Woody Smith <woodysmith_at_comcast.net>
Date: Fri Mar 28 2008 - 23:43:32 EDT

I had this happen, but in my case the port door cover had broken due
to a drop and sliced through the digitizer cable

I repaired it and had many years of use, without the port door .
Requires lifting out the logic board to see.

I n fact I advocate losing it ASAP.

Woo
On Mar 28, 2008, at 7:48 PM, SbM wrote:

> Hi guys,
>
> Bad news : my 2100's touch screen seems to be dead. The display is OK,
> but the machine doesn't react at all when I press the stylus on the
> screen. I can't even calibrate it, it's as if there was no touch
> screen at all (at least the "touch" part).
>
> I opened the 2100, I cleaned the touch screen cable contacts with
> alcohol (as advised on Frank Gründel's web site), I also cleaned the
> area around the screen just in case, cleaned the gold contacts on the
> motherboard, and reassembled the unit : doesn't work any better :-(
>
> I'm stuck here. Ever heard of such a problem ?
> --
> SbM

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Fri Mar 28 23:43:37 2008

This archive was generated by hypermail 2.1.8 : Tue Apr 08 2008 - 17:34:51 EDT