Re: [NTLK] New MP130, no sound

Frank,
thanks for your reply.

> Make sure both system and action sounds are turned on in the sound preferences.

They are.

>> Could someone tell me which voltage and polarity the MP130 needs?
> 7 to 7.5 Volt. Plus inside, Minus outside.
>> Which other requirements must such an adapter match?
> It should limit the current it puts out to no more than 1.2 Amps.

Thanks, I really needed that information.

> There's one for the 130 right next to it. Just replace the "2" with a "3"...

Oh, I missed that.

>> Example: It says that one should simply pull out the flip cover.
> Yep...

After reading your post, I know what you mean. I first tried to pull
it out horizontally, which seems to give some more resistance compared
to pulling in a 90° angle. It does indeed come off easily by pulling
it the way you described.

Sorry for putting in doubt the accuracy of your instructions.

However, the main point of my post was the missing sound, and that's
still somehow unresolved.

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Sat May 9 22:30:26 2009