[NTLK] Can't connect my Newtons...

["Piotrowski Paweł (Newton)"]

I’ll try reset my router. I think this is last what I can do ;)



On 16 Apr 2016, at 17:42, Dan <dan at dbdigitalweb.com> wrote:

> I suspect it has nothing to do with your Newton's but the router.  I
> would check its settings.  Not just a reboot but perhaps reset and
> reconfigure it.  I have seen cases where a router was seemed to be set
> up properly but didn't work, but then after a reset and reconfigure it
> did.  Also if you haven't tried turning off all encryption, I would do
> that.  I have also had this problem with DSL/Cable modems at times where
> nothing worked but a full reset and reconfigure (and it worked fine for
> months without any changes then after a power failure it went crazy).
> But if your modem is working fine with other devices, I doubt that is
> the problem.
> 
> -DB
> 
> Perhaps a firewall in the router got turned on and is blocking your Newtons.
> 
> On 4/16/2016 9:02 AM, Piotrowski Paweł (Newton) wrote:
>> Still I haven’t solution :(
>> 
>> What I’ve done:
>> 
>> 1. Full Newton reset and all soft&config from beginning - nothing
>> 2. Reboot all network - nothing
>> 3. I’ve changed WiFi card to LAN card on Newton - nothing
>> 
>> I don;t have other ideas…
>> 
>> 
>> Any advice? Anything, Guys?
>> 
>> 
>> 
>> 
>> Best regards,
>> Pawel Piotrowski
> 
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk