[NTLK] Connecting to Win 10

[Tere]

Progress! I got Win2000 Pro running in VirtualBox (6.0.4), installed NCU
and connected to my 2100. I decided to install a patch for y2k10 bug. I was
on build 710031, so I first installed the patch remover. After rebooting,
It was at 717006. I tried installing the 711000 patch. I seemed to install,
but after I rebooted, it said it was still 717006. Should it reboot on it
own, or do I need to do that? Is it safe to install the patch again? Thanks
all!

On Sun, Feb 17, 2019 at 5:24 PM Tere <tjggriffin1 at gmail.com> wrote:

> I have a Mac, 13 in Macbook, early 2009, OS X 10.11. I installed NCX 2.3.
> I've been unable the get any cable to connect. They time out after I tap
> Connect in Dock on the Newton. The LED on the FTDI and Keyspan cable blink
> at a steady pace. I think that means it's in standby. When they Keyspan is
> connected to the SP6, it flicker when talking to the Newton. I'm if it's
> hardware or dirvers. The USB ports work fine otherwise.
>
> One thing I noticed when setting up a network entry for the serial port on
> the Mac side, is there is no common data rate for the Newton, NCX and OS X
> network settings. The OS X options are 9600, 19.2k, 57.6k and 115.2k bps.
> There is no 38.4k. The Newton has 38.4k, 9600, 4800, and 2400, and NCX has
> 38.4k, 57.6k, 115.2k and 230.4k. It would be nice if NCX had the same data
> rates as the Newton. Then at least I could use 9600.
>
> On Sun, Feb 17, 2019 at 6:00 AM Christoph Schröder <newtonhonk at posteo.de>
> wrote:
>
>> If it is just for the rpm, find someone with a Mac. Download ncx. Works
>> fine.
>> ----------------------------------------------------------------------
>>
>> http://newtontalk.net/
>> http://twitter.com/newtontalk
>>
>
>
> --
>
> - Tere
>


-- 

- Tere