You guys are making my head hurt! Are humans supposed to know this
stuff?!!!
::mitch::
On Tuesday, July 9, 2002, at 09:37 , Daniel Padilla wrote:
>> It doesn't work!! I can change the levels on the multiplier pins but it
>> doesn't seem to work properly. It either works at the same speed or
>> hangs.
>> Has anyone else looked into this? Any hints and tips from the hardware
>> gurus greatly appreciated.
>>
>
>
> Hi Andy. I tried this approach a few months ago. Gave up because
> i could
> not see any difference either. I tried many different configurations
> and none
> did anything, the newt worked at the same speed.
>
> IMHO the multiplying factor is fixed in the chip. I know the 162
> mark on
> the SA can mean that it didn't pass a higher speed test, but it also
> can mean
> that it's locked to that speed.
>
> BTW, I think it would work ok if it wasn't locked, there are
> different
> multiplying references for memory and core speeds.
>
> Let us know it you find anything!
>
> Daniel Padilla
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Thu Aug 01 2002 - 06:02:17 EDT