It's a bit hard to explain...allright, you've got your rectangular=
NuShield, with the long sides being slightly curved so as to fit=
underneath the long edges of the screen. The part I had to trim was not=
the curved side, but the flat one that corresponds to the short edges.=
According to the instructions I was sent, those ends do not get tucked=
under the screen. They were cut a millimeter or two too long to fit in=
the screen.
Michael Mays
*********** REPLY SEPARATOR ***********
On 5/24/2002 at 12:22 PM Chris Chapman wrote:
>Hmm, I've never had to cut mine. They've always fit. It might take a few
>minutes to work it under the case and sandwich it between the case and the
>display. As far as reflection, try turning on the backlight, seems to work
>for me. At night with the backlight on you can't even tell the nushield is
>installed. They really are good. Just give it a month and see how many
>gouges are in the nushield. And they are cleanable too. I just make sure
>not
>to get any fingerprints on the side that is resting against the screen
>because that can also affect visibility.
>
>-Chris
>----- Original Message -----
>From: "Michael Mays" <chaosmonk_at_earthlink.net>
>To: <newtontalk_at_newtontalk.net>
>Sent: Friday, May 24, 2002 12:08 PM
>Subject: Re: [NTLK] NuShield
>
>
>>
>> In response to Chris: They were about two millimeters too long to=
fit=3D
>> inside the screen area. Not the parts that actually go underneath=
the=3D
>> screen, but the length itself. They wrinkled all up when I tried to
>put=3D
>> them in, and I examined the ones I had closely and found the
>discrepancy=3D
>> in length. Once I trimmed them down a teeny bit, they went in nice=
and=3D
>> securely.
>>
>> In response to Victor: I didn't have a previous screen protector
>installed=3D
>> on my Newton; I just got it yesterday. It was one of=
GEMEnterprises's=3D
>> brand new units. I'm not sure why it kills my visibility so badly.
>>
>> Michael Mays
>>
>>
>> --
>> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
>> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
>> This is the NewtonTalk mailing list - http://www.newtontalk.net
>>
>
>
>--
>Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
>Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
>This is the NewtonTalk mailing list - http://www.newtontalk.net
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jun 12 2002 - 20:02:43 EDT