Hi Jon,
I used the directions to choose the pkgs and install the cards. In the
cards list my card is there, and I selected it. I'm afraid it's
something else. I should also say I'm using a 2100.
/Damien
-----Original Message-----
From: Jon Kinney
Sent: Mon 11/18/2002 9:12 PM
To: newtontalk_at_newtontalk.net
Cc:
Subject: Re: [NTLK] TCP/IP Dock-not even trying
Go here and follow the directions...like it says, you have to
install the
required packages first. I have that same card and it works
great, I got all
my drivers and info from the following site
<http://www.chuma.org/newton/ethernet/>
Hope that helps,
Jon
On 11/18/02 1:25 PM, "Damien Batstone" <djb_at_er.dtu.dk> wrote:
>
>
>
> Hi All,
>
> I got my nice new 3C589D ethernet card today, and put it in my
newton. I
> installed ETH2.0/card drivers/TCP dock needed on a friend's
powerbook last
> weekend. The newton pings the card on startup, and then it
stays on for a
> while. When I try to connect using TT's TCP dock, it goes
through a rapid
> cycle of waiting for response/establishing link/waiting for
response/ and
> then "Connection error"/"No link setup is defined" error
boxes, even with
> the card out of the Newton. It doesn't even activate the card
lights,
> indicating nothing's going on. The card works fine in two
laptops, and
> when I try appletalk from the newton over ethernet (when
plugged into a
> hub), the light goes off like a Danish Christmas. I stupidly
didn't
> install any other ethernet utilities apart from TCP dock so
can't test them.
>
> I've got DIL tester listening (I've checked with netstat
-van), and have
> tried with a few other ports. I've tried with both a tested
crossover
> cable, and through my hub/DHCP server/router/firewall black
box. I'm
> trying to connect via a 10/100 intel miniPCI on an IBM TP R31
with win2k
> Pro. Any ideas or special tricks? I'm at my wits end.
>
> Regards,
>
> Damien
>
--
This is the NewtonTalk list - http://www.newtontalk.net/ for all
inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Mon Dec 02 2002 - 22:03:05 EST