From: René Groot (groot_at_mac.com)
Date: Tue Sep 17 2002 - 02:59:28 PDT
My experience: the Newton will not connect if the base station it is=20
actually connected through is NOT the one that serves the DHCP. In=20
other words, if there is a router or another station behind it, that=20
acts as DHCP servers, it will typically error out. If you can move=20
closer to the base station that actually serves these, you're lucky. If=20=
it is a router then you're out of luck. I managed to get by it using=20
the new Software Base Station functionality in 10.2
Ren=E9=
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.chuma.org/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net/
This archive was generated by hypermail 2.1.5 : Mon May 26 2003 - 12:59:21 PDT