From: Martin Joseph (martyNT_at_barknaturalpet.com)
Date: Fri Jun 13 2003 - 12:33:49 PDT
On Friday, June 13, 2003, at 12:03 PM, Michael J. Hu=DFmann wrote:
> Peter Cameron (pdwc_at_sympatico.ca) wrote:
>
>> Charging NiMH in a 1x0 Newton may "work" but
>> it's not good for the charging circuitry of the Newton or for the=20
>> cells
>> since they are not being charged properly.
>
> Yep, that's the theory. I was just pointing out that I have used and
> charged NiMH cells in my first MP120 for years, using the original
> charger and the cradle, with no problems whatsoever.
<snip>
Same here. I actually have two 120's under my care that are using NiMH=20=
batts and they both seem to charge and run fine with the charging=20
happening inside the Newton.
Has someone here actually experienced a problem from doing this? Or is=20=
it just presumed to be problem?
Marty
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Fri Jun 13 2003 - 16:30:01 PDT