From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.int)
Date: Wed Apr 06 2005 - 06:00:06 PDT
YES, but the NaNs are just the next problem ...
Cheers,
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Michael Briley
> Sent: Wednesday, April 06, 2005 7:39 AM
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] Help with GPS MAP process (VERY,VERY LONG POST)
>
> Dear Ed,
> John is essentially correct. To use the MakePixFamily function, you
> must have NTK version 1.6.4 (Mac) or 1.6.1 (Windows), and you must
> use the Newton 2.1 platform Project Setting. Look in the Project menu
> under Project Settings (at the bottom). Pick the Project Setting icon
> and select "Newton 2.1" as the Platform.
> But also note you have other troubles. When you look at the output of
> the calibration generator (as shown in your listing of afterScript),
> you have several NaNs. This is bad as NaN means "Not a Number."
> Something has gone wrong with the calibration (usually a floating
> point overflow/underflow). What, I don't know because I don't know
> what your inputs were. Just remember it asks for latitude (N/S)
> first, then longitude (E/W), and east longitudes are positive, west
> longitudes (e.g., California) are negative.
> Cheers,
> -Mike
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Wed Apr 06 2005 - 06:30:01 PDT