Re: [NTLK] Connection troubles

I had a pismo and couldn't get it to connect directly using an ethernet
cable, not even with a crossover cable.(Then again I didn't have a hub or
switch).

However a cheap (prolific) usb to serial adapter worked well under os9.2.2.

Andy

----- Original Message -----
From: "Woody Smith" <woodysmith@comcast.net>
To: <newtontalk@newtontalk.net>
Sent: Thursday, May 15, 2008 3:31 PM
Subject: Re: [NTLK] Connection troubles

> The Pismo is also able to connect to the internet?
> Are they connected to the same hub/switcher or are you attempting to
> direct connect?
> I don't recall anyone using irda to successfully connect with NCU
>
> For a direct connect via wifi have a look at how Peter Hufman did a
> manual setup.
> <http://marc.info/?l=newtontalk&m=119321375207215&w=2>
>
>
> On May 15, 2008, at 6:02 AM, Steve Cook wrote:
>
>> I've searched the archives for the answer, but haven't found one yet.
>> Working with a MP2000u, and a host Pismo laptop with a full install
>> of OS
>> 9.2.2. It has an IrDA, but no serial port. My goal is to get NCU 2.0
>> working, but so far, no luck.

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Thu May 15 12:30:47 2008