Hi David
I'm sorry I don't think I can help with this as I'm not a mac user and
not technically aware.
I would say this all seems far too complicated.( but I may be totally wrong)
Can't you chose DHCP Server instead of manual. With my wireless set up I
haven't put any of the addresses you have mentioned in.
I just chose DHCP service and then the card??
My only other suggestion is whether you have followed Frank's
instructions for achieving ethernet / wireless connectsions at pda-soft.
I can't find the specific link at the moment but I'm sure someone will
chime in with it. This is what I did and it worked for me.
Alternatively I don't know if this recent thread would help you out?
http://marc.info/?l=newtontalk&m=124356875000712&w=2
or:
http://old.chuma.org/newton/ethernet/instructions.shtml
Hope you can get it sorted out.
Andy
David Neale wrote:
> ...
>
> The Internet Setup is as follows:
>
> Configuration: Manual
> Card: Lucent WaveLAN/IEEE
> Subnet Mask: 255.255.255.0
> Local IP Address: 10.0.2.4 (Why? No idea, other than that I saw this
> used on a working setup somewhere)
> Gateway/Router Address: 192.168.0.1 (This is the IP address of my
> Airport)
> Primary DNS/Name Server Address: 10.0.1.1 (I have no idea why, but saw
> it used on a working setup -- it is, I believe, also the address of my
> iMac, but I do not know if this is of any significance -- I don't see
> that I need to use the iMac in any way)
> Alternate DNS/Name Sarver Address: 10.0.1.1 (same comment)
> Domain Name: <None>
>
>
>
====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Sun May 31 17:27:55 2009
This archive was generated by hypermail 2.1.8 : Sun May 31 2009 - 19:30:00 EDT