[NTLK] overclocking the MP2x00

[Jim Lee]

Radio Shack carries the wire.  Look for "Wire Wrap" wire in #28 or #30  
gauge.  Also, you'll want to use a low-wattage soldering iron in the  
15-25W range.  Anything hotter will damage chips and lift traces.

-Jim

On Feb 28, 2010, at 11:29 PM, j g wrote:

> Can one overclock Newton more than only 30%? What is the limit? How to
> solder tiny wires to the chip? Where to buy tiny wires?
> John
>
> On Feb 27, 2010, at 11:59 PM, Neal Trembath wrote:
>
>> Shadiorack carries a SPDT mini switch that fits in the 200x
>> manhole.  If you cut one of the switch's nibs, the other fits neatly
>> into the port cover groove and the switch is exactly the height of
>> the hole.  It's half the width, which allows an audio in/out jack.
>>
>
>
> ====================================================================
> The NewtonTalk Mailing List - http://newtontalk.net/
> The Official Newton FAQ     - http://splorp.com/newton/faq/
> The Newton Glossary         - http://splorp.com/newton/glossary/
> WikiWikiNewt                - http://tools.unna.org/wikiwikinewt/
> ====================================================================
>