Re: [NTLK] Suddenly I can't Backup my Newton

From: Marco Mailand (Newton2k1_at_mac.com)
Date: Tue Jun 11 2002 - 08:30:48 EDT


> Help me get my Ethernet connection back! Jim Charney
Broken Ethernet cable was the cause in my case. Check for the green LED (as
my dear friend and former colleague Johannes pointed out) and try to push
and pull the cable at the ethernet card and watch the LED and connection
status in NCU. If the connector should be defective, I would be able to
repair it for you.

The cause of this failure might be dropping of the Newton with Ethernet
cable attached. In my case the cable pulled-out the card, which worked about
3 times till total failure :-(

--
With best regards / Viele Gruesse

Marco Mailand http://slsbd.psi.ch/timing http://slsbd.psi.ch/~mmailand https://www.paypal.com/refer/pal=YYD3VUXUVD2YG

-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:02:05 EDT