Your luck is that the output voltage of your adaptor will probably fall
below 7.5 Volts if loaded with 50-100 mA, which is the nominal current teh
MP2x00 will draw (without charging and w/o BL)
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of John Acuff
> Sent: Friday, November 08, 2002 8:57 PM
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] Generic AC adapter
> Maybe I have been lucky, but that's rarely the case for me!
> FWIW, I put my Snap-On digital VOM across the plug of the adapter and
> got just under 9 VDC with only the load of the meter. All I know is that
> it seems to charge in a manner that I would expect. I haven't noticed
> the battery getting hot while the adapter is attached (and charging) and
> I'm using the Newt.
> John
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Mon Dec 02 2002 - 22:02:28 EST